Model PD6000 Analog Input Process Meter Instruction Manual
82
Alphabetical List of Display Functions & Messages
Display Parameter
Action/Setting
Description
20 mA
20 mA output
Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
4 mA
4 mA output
Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
999999
-99999
Flashing
display
Overrange condition
Underrange condition
Ack
Acknowledge
Acknowledge relays
Act 1
Action 1
Set relay 1 action
addrEs
Address
Set meter address
Alm 1
Alarm 1
Assign digital output to Alarm 1-8
Altern
Alternate
Set relay for pump alternation control
A-man
Auto-manual
Set relay for automatic & manual reset
Aout
Analog output
Enter the
Analog output
scaling menu
Aoutpr
Analog output
programming
Enter analog output programming
Auto
Automatic
Press Enter to set automatic operation
baud
Baud rate
Select baud rate
big
Big display
Press Enter to assign the main display pa-
rameter (default: PV)
Big Hi
Max on big
display
Assign digital input to display max on the
main display
Big HL
Max/min big
display
Assign digital input to toggle max/min on the
main display
Big Lo
Min on big
display
Assign digital input to display min on the
main display
break
Loop break
Set relay condition if loop break detected
bypASs
Bypass
Set filter bypass value
C CAL
Current
calibration
Calibrate 4-20 mA current input (internal
reference source used for scaling the input)
C Hi
Current high
Calibrate high current input (e.g. 20 mA)
C lo
Current low
Calibrate low current input (e.g. 4 mA)
