PDW90 Point to Multi-Point Wireless Instruction Manual
26
4-20 mA Analog Output
The
4/20mA Output
tab is used to program the selected field unit’s analog output. Once you have modi-
fied the settings, click the
Save Configuration
button to save these settings to the field unit.
The
IO Mapping
section will show to what (if any) device the analog input has been mapped. The
Moni-
toring
section at the bottom may be used to view the current analog output reading or manually test ana-
log output operation.
Note: For information about
Modbus Access
, please see
Modbus Register Address vs Modbus Register
Number
on page 28.
www.
.com
1.800.561.8187
