PDW90 Point to Multi-Point Wireless Instruction Manual
25
Remote Unit Configuration
The
Remote Unit Configuration
tab is where connected field units may be programmed to communicate
with the base station. Select a connected field unit from the
Connected Clients
list in order to begin pro-
gramming that unit.
A field unit’s human readable name may be changed by clicking the
Change Name
button. Be sure to
give each field unit a descriptive name, such as the location of the unit in your facility or the devices con-
nected to it, in order to make future programming easier.
Analog Input
Each field unit’s analog input may be programmed to accept a 4-20 mA, 0-10 V, 0-5 V, or 1-5 V signal.
Once you have modified the settings, click the
Save Configuration
button to save these settings to the
field unit.
The
IO Mapping
section will show to what (if any) device the analog input has been mapped. The
Moni-
toring
section at the bottom may be used to view the current analog input reading or manually test analog
input operation.
Note: For information about
Modbus Access
, please see
Modbus Register Address vs Modbus Register
Number
on page 28.
www.
.com
1.800.561.8187
