■
4 Modes of operation and operating
18
4
Modes of operation and operating
4.1
Switching on the balance
• Press «
ON/OFF
» to switch on the balance.
The balance carries out a self-diagnosis in order to check the most im-
portant functions. After completion of the start-up process (approxi-
mately ten seconds) „Zero“ appears in the display.
The balance is ready for operation and is in the weighing mode.
4.2
Auto-Standby Mode
The balance is equipped with an Auto-Standby mode, which can be
activated or deactivated in the configuration menu.
If the Auto-Standby mode is activated, the balance automatically
switches to Standby some time after the last weighing or key
operation (current-saving function).
The delay before switching to Standby is defined in the configuration
menu (see chapter 5.6 “Weighing mode”).
4.3
Setting and storing the configuration
• Press «
ON/OFF
», to switch on the balance.
• Continue to hold down the «
MODE
» and the «
0/T
»-button during
the start-up process, until the desired configuration appears on the
display and then release the button:
„ConF FCT”: Load factory configuration.
„ConF USR”: Load user configuration.
„StorE USR”: Store present configuration as user configuration.
