■
4 Modes of operation and operating
24
4.8
Anti-theft encoding
The balance can be protected against theft by a freely selectable,
four-figure numerical code:
• With anti-theft encoding deactivated, the balance can be switched
on again and operated without entering a code.
• With anti-theft encoding activated, the balance requires the entry of
the four-figure code each time when switched on.
• If the code is input incorrectly, the balance is blocked.
• If the balance is blocked, it must first be switched off and on to en-
ter the correct four-figure code again.
• If you have lost your code, ask Precisa Service to unblock the bal-
ance again.
To activate the anti-theft encoding and to alter the code programmed
in the works to one which you have chosen yourself, see chapter 5.10
“Anti-theft encoding”.
NOTE
The password protection is deactivated at the works.
The
pre-programed password
set in the works is:
7 9 1 4
This password is the same for all Precisa balances and is always
valid, in parallel with a self-selected password.
Make a note of your
personal password
.
NOTE
The anti-theft-encoding is deactivated in the works.
The
pre-programmed code
set by the works is:
8 9 3 7
This code is the same for all Precisa balances. For reasons of
security you should therefore always select your own code.
Keep your personal code in a safe place.
