■
14 Further information
60
14.1.3 Set Weighing mode: Auto-Standby
The Auto-Standby mode turns off the balance automatically, if:
• the balance is tared and has shown „Zero” for at least 5 minutes
• the automatic zero correction „Auto-Zero” is activated.
It is possible to start the balance again after it has been switched off
by an automatic Auto-Standby:
• Briefly depress any key
• Put a weight on the scale
14.1.4 Set Weighing mode: Auto-Zero
If the automatic zero correction „Auto-Zero” is activated, the balance
always gives a stable zero (e.g. even with room temperature fluctua-
tions).
14.2 Notes on calibration
The calibration of the balance is fixed in the configuration menu (see
chapter 3.7 “Calibration of the balance” and chapter 5.5 “Calibration
functions”).
Possible types of calibration, depending on the model of balance:
• External calibration by means of ICM (Intelligent Calibration Mode)
• External calibration with freely selectable weightn
NOTE
The balance needs to be switched on with «
ON/OFF
» when the po-
wer is supplied by a battery or an accupack.
NOTE
The calibration can be interrupted at any time by pressing
«
ON/OFF
».
