Precisa 160 BJ Operating Instructions Manual Download

Page: 32 / 79

■

5 Working with the configuration menu

Working with the
configuration menu

This chapter describes the configuration menu and its functions.

To activate the menu, see Chapter 4.5 “Activating the two main me-

nus” and Chapter 4.6 “How the menu control operates”.

5.1

Structure of the configuration menu

The basic adjustment of the balance is defined in the configuration

menu:

Printing conventions used in this document:
• The settings in the sub-paths pre-programmed in the works are prin-

ted in

bold

in these operating instructions.

Main path

Definable functions

LANGUAGE

Language (E, G, F)

UNIT-1

Unit in which the results of the weighing are dis-

played

SET

DATA PRINT

Print formats; Type of values to be printed (indivi-

dual values, continuous printout, time or load
change dependent values, date, time, user, etc.)

SET

CALIBRATION

Method of calibration

SET

WEIGHING MODE

Stability mode (Quality of the balance location),
Auto-Standby mode, zero correction, tare method

(rapid or standard tare)

SET

INTERFACE

Baud-rate, parity, handshake functions of the peri-
pheral interface

SET

DATE AND TIME

Date and time (standard format or American for-

mat p.m. and a.m.)

PASSWORD

Password protection for defining the menus

THEFTCODE

Activating/deactivating and changing the anti-theft

code.

KEY TONE

Activation of the keypad sound

BUS

Enables disables Precisa BUS accessories

Summary of Contents for 160 BJ
















































































Search results

Summary of Contents for 160 BJ

Reviews:

Related manuals for 160 BJ

Brands by name

Popular brands

Precisa 160 BJ, Operating Instructions Manual

Search results

Summary of Contents for 160 BJ

Reviews:

Related manuals for 160 BJ

Brands by name

Popular brands