Precisa 160 BJ Operating Instructions Manual Download

Page: 63 / 79

10 Practical examples

■

10.2 Selection of an application program

See Chapter 4.5.2 “Activating the application menu” for the activati-

on of the application menu.

10.2.1 Setting for Counting by weighing

For Setup, see Chapter 6.5 “Application “COUNT””

To count uniformly heavy objects such as coins, screws or similar

things, proceed as follows:

PASSWORd 7

• Press «

MODE

» until the second

digit flashes. Enter the second

digit by briefly pressing «

MODE

repeatedly.

PASSWORd 7914

• In the same way enter the third

and fourth digit of the password.

• Hold down «

MODE

» until input is

complete (no digit flashing).

DATA-PROTECTION OFF

• Press «

MODE

» briefly. “DATA-

PROTECTION ...” will appear.

• Press «

MODE

» repeatedly, until

the desired data-protection is

displayed (the setting will flash).

new PASSWORd 7914

• Press «

MODE

» and hold down

button until “NEW PASSWORD

7914” appears.

• Release the «

MODE

»-button.

new PASSWORd 1234

• Your own new password can now

be entered in a similar manner to

the foregoing.

PASSWORd ––––

• Press «

PRINT

» to return to

“PASSWORD ––––”.

• Press «

PRINT

» to exit menu.

SET APP. . . .

• Press «

MODE

» and hold down

button until the currently set ap-

plication appears.

• Release the «

MODE

»-button.

Summary of Contents for 160 BJ
















































































Search results

Summary of Contents for 160 BJ

Reviews:

Related manuals for 160 BJ

Brands by name

Popular brands

Precisa 160 BJ, Operating Instructions Manual

Search results

Summary of Contents for 160 BJ

Reviews:

Related manuals for 160 BJ

Brands by name

Popular brands