6 Working with the application menu
■
47
You can carry out density determinations with the aid of the
“DENSITY” program.
•
Assignment of the function keys on initialization:
•
Assignment of the function keys on measurement:
Operation:
Start the application (see Chapter 6.3 “Changing application / weigh-
ing mode”).
• Press the «
REF
»-button until the desired function flashes on the dis-
play.
• Release the «
REF
»-button.
The program leads the operator through the individual operating steps.
See Chapter 14.3 “Notes on density determination” for further expla-
nations of density determination.
TEMPERATURE
20.0 C
Temperature of the
water used for the
measurement
DECIMALS
3
Decimal places for
density calculation
NOTE
A Density Measurement Set (see Chapter 13 “Accessories”) is
available as an optional extra.
You can also determine the density of solids without this accessory
(see Chapter 14.3 “Notes on density determination”).
«OK»:
Accept current reference density
«CAL»:
Calculate reference density of the measuring liquid
«T-H2o»: Set reference density to water at nn.n °C
«20.0C»: Set reference density to water at 20.0 °C
«AIR», etc
Invitation to measure the corresponding value
«<–>»:
“Switch” from index to density
«SET»:
Executes corresponding step
«STO»:
Stores corresponding value (statistics)
