Pratt & Whitney Canada PT6A Turboprop Instruction Manual Download Page 44 | Manualshive

Page: 44 / 48

background image

43

43

43

It is a general characteristic of aircraft that for a particular gross
weight, the power required for take-off varies comparatively little with
ambient conditions. PT6A engines are typically “flat rated” to allow for
the maximum possible take-off power required by the aircraft over a wide
range of ambient temperatures without having to work the engine harder
than is necessary at any time.

The flat-rated power is available up to the thermal capability of the
engine, specified as an ambient temperature and altitude.

recommenDeD pt6A engine power mAnAgement

Ambient
Temperature
and Altitude

POWER

Take-off

Max.

Continuous
Max Climb
Max Cruise

Gearbox Limit

It is a general characteristic of aircraft that for a particular gross
weight, the power required for take-off varies comparatively little with
ambient conditions. PT6A engines are typically “flat rated” to allow for
the maximum possible take-off power required by the aircraft over a wide
range of ambient temperatures without having to work the engine harder
than is necessary at any time.

The flat-rated power is available up to the thermal capability of the
engine, specified as an ambient temperature and altitude.

recommenDeD pt6A engine power mAnAgement

Ambient
Temperature
and Altitude

POWER

Take-off

Max.

Continuous
Max Climb
Max Cruise

Gearbox Limit

«
...
42
43
44
45
46
...
»

Summary of Contents for PT6A Turboprop

















































Reviews:

No comments

Related manuals for PT6A Turboprop

Brand: VEM Pages: 35

Brand: Habasit Pages: 54

Brand: Cadillac Pages: 36

Brand: TIS Pages: 12

Brand: WÜRGES Pages: 24

Brand: Hacker Pages: 2

Brand: Hacker Pages: 7

Brand: Hacker Pages: 8

Brand: Hacker Pages: 8

Brand: YS Pages: 2

Brand: ActSafe Pages: 32

Brand: Wood-mizer Pages: 80

Brand: Ford Pages: 124

1941 4-cylinder engine

Brand: Ford Pages: 25

Brand: TECO-Westinghouse Pages: 20

Brand: TRAXX Pages: 8

Brand: Vanguard Pages: 8

Char-Lynn 10000 Series

Brand: Eaton Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands