background image

11

1

Congratulations on your acquisition of an aircraft powered by the 
Pratt & Whitney Canada Corp. (P&WC) dependable PT6A Turboprop 
Engine! Just like you, operators around the globe  have made the 
PT6A engines their choice in the business and general aviation 
market – engines known to provide exceptional power, performance 
and peace of mind. By making this wise choice, you are benefiting 
from 45 years and 300 million hours of in-service experience 
resulting in unmatched reliability.

This handbook has been designed to give you a brief overview 
of the PT6A engine as well as some maintenance and power 
management recommendations. Always refer to the Pilots Operating 
Handbook (POH), Aircraft Flight Manual (AFM), Engine Maintenance 
Manual (EMM), Service Bulletin’s (SB) or other service information 
documentation for a complete text of the approved / recommended 
procedures and latest information. 

Know your pt6A turboprop

Congratulations on your acquisition of an aircraft powered by the 
Pratt & Whitney Canada Corp. (P&WC) dependable PT6A Turboprop 
Engine! Just like you, operators around the globe  have made the 
PT6A engines their choice in the business and general aviation 
market – engines known to provide exceptional power, performance 
and peace of mind. By making this wise choice, you are benefiting 
from 45 years and 300 million hours of in-service experience 
resulting in unmatched reliability..

This handbook has been designed to give you a brief overview 
of the PT6A engine as well as some maintenance and power 
management recommendations. Always refer to the Pilots Operating 
Handbook (POH), Aircraft Flight Manual (AFM), Engine Maintenance 
Manual (EMM), Service Bulletin’s (SB) or other service information 
documentation for a complete text of the approved / recommended 
procedures and latest information. 

Know your pt6A turboprop

Summary of Contents for PT6A Turboprop

















































Reviews: