23
23
23
controls
Propeller Overspeed Governor
All PT6A turboprop installations are equipped with an airframe-supplied
propeller overspeed governor. This unit has its own dedicated drive from
the engine reduction gearbox and is intended to limit the propeller speed
to a predetermined maximum value in the event of a malfunction of the
primary propeller governor.
In most installations which feature an automatic feathering system, the
automatic propeller feathering function is performed by an electrically-
activated propeller servo oil dump valve on the overspeed governor.
Overtorque Limiter
On some PT6A engine installations an overtorque limiter is installed
to limit maximum engine output torque to a preset value. This function
has been utilized on applications where the normal power setting and
monitoring procedures cannot be used, such as military trainer aircraft
which are intended to maintain the maximum operational similarity to
high-performance jet aircraft. Other applications with substantially flat
rated PT6A engines utilize an overtorque limiter to prevent inadvertent
excessive power settings by the pilot.
An electronic limiter system is also installed on some engine models
intended for military trainer aircraft. This system offers both torque and
ITT limiting capability.
Manual Override
All PT6A engines intended for single-engine aircraft are equipped with a
manual override function installed on the fuel control unit. The manual
override can be connected to an Emergency Power Lever (EPL) in the
cockpit by an airframe-supplied linkage, if required by the aircraft
manufacturer.
controls
Propeller Overspeed Governor
All PT6A turboprop installations are equipped with an airframe-supplied
propeller overspeed governor. This unit has its own dedicated drive from
the engine reduction gearbox and is intended to limit the propeller speed
to a predetermined maximum value in the event of a malfunction of the
primary propeller governor.
In most installations which feature an automatic feathering system, the
automatic propeller feathering function is performed by an electrically-
activated propeller servo oil dump valve on the overspeed governor.
Overtorque Limiter
On some PT6A engine installations an overtorque limiter is installed
to limit maximum engine output torque to a preset value. This function
has been utilized on applications where the normal power setting and
monitoring procedures cannot be used, such as military trainer aircraft
which are intended to maintain the maximum operational similarity to
high-performance jet aircraft. Other applications with substantially flat
rated PT6A engines utilize an overtorque limiter to prevent inadvertent
excessive power settings by the pilot.
An electronic limiter system is also installed on some engine models
intended for military trainer aircraft. This system offers both torque and
ITT limiting capability.
Manual Override
All PT6A engines intended for single-engine aircraft are equipped with a
manual override function installed on the fuel control unit. The manual
override can be connected to an Emergency Power Lever (EPL) in the
cockpit by an airframe-supplied linkage, if required by the aircraft
manufacturer.
Summary of Contents for PT6A Turboprop
Page 1: ...Key NEW OWNER WISDOm YOUR PT6A turboprop ...
Page 5: ......
