Moon manual.doc
2/14
SECTION PAGE
SAFE USAGE OF THE PROJECTOR
3
INSTALLING THE PROJECTOR
4
FITTING THE LAMP
4
POWER SUPPLY – MAINS
5
OPERATION
5
STAND-ALONE MODE
6
XLR CONNECTIONS AND TERMINATOR
6
MASTER/SLAVE SYNCHRO MODE
7
CONTROLLER MODE - DMX OPERATION
8
DMX CONTROL CHANNEL FUNCTIONS
9
MAINTENANCE
9
CHANGING THE GOBOS
10
LUBRICATION
10
KEEPING THE PROJECTOR CLEAN
11
TROUBLESHOOTING
11
TECHNICAL DATA
11
ELECTRICAL DIAGRAM
12
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change
without notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the
course of product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any
consequence arising from them.
Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and / or the unit is in
good condition before installation and use. Should there be any damage caused by transportation, consult your dealer and do
not use the unit. Any damage caused by improper use will not be assumed by the manufacturer and / or dealer.
THESE ITEMS ARE PACKED TOGETHER WITH THE PROJECTOR
Mounting Bracket (1 PCS)
M6 Knob for mounting bracket (2 PCS)
Safety cord (1 PCS)
Power-cord (1 PCS)
XLR plug (1 PCS)
XLR socket (1 PCS)
This manual (1 PCS)
Thank you for purchasing the MOON, PR-111ER.
The MOON is an innovative projector with an elegant housing made from high intensity and heat-
resistant complex plastic. The projector complies to CE norms and standards and uses international
protocol DMX-512. The unit can be controlled by sound, auto programmes or a controller, it may be
used as a stand-alone unit, so it is suitable for many different applications.
The MOON features 10 dichroic colours which can produce a rainbow effect when the colour-wheel
rotates quickly and 8 rotatable and interchangeable gobos, and an independently adjustable
strobe/shutter. The unit has an auto thermal cut-off for working safety. It can be setup easily via the
touch-switches and the digital display.
ACCESSORIES
INDEX
INTRODUCTION
