background image

Moon manual.doc 

9/14 

 
 
 
The MOON uses 6 channels with standard DMX 512 protocol. They are listed in the following table. 
 

CHANNEL 

DMX VALUE 

DESCRIPTION 

0-17 

White 

18-35 

Red 

36-53 

Yellow 

54-71 

Orange 

72-89 

Blue 

90-107 

Green 

108-125 

Cyan 

126-143 

Ultraviolet 

144-161 

Pink 

162-177 

Light green 

Colour 

178-255 

Change of colours from slow to fast till rainbow effect 

0-31 

Open / Clear 

32-63 

GOBO 1  (Triangle) 

64-95 

GOBO 2  (Multi-circle) 

96-127 

GOBO 3  (Windmill) 

128-159 

GOBO 4  (Stars) 

160-191 

GOBO 5  (Flying-swallows) 

192-223 

GOBO 6  (Swirl) 

Gobo 

224-255 

GOBO 7  (Radiation) 

0-14 

Black-out 

15-29 

Open 

30-250 

Strobe adjust from slow to fast (1 to 7 flashes per sec.) 

Shutter/Strobe 

251-255 

Open 

0-4 

Stop 

5-120 

Rotate in opposite direction from slow to fast reaching 
114 rpm 

121-139 

Stop  

Gobo rotation 

140-255 

Rotate from slow to fast reaching 114 rpm 

5 Pan 

0-255 

Pan movement from 0

°

to 175

°

 

6 Tilt 

0-255 

Tilt movement from 0

°

to 80

°

 

 
 
 
 
If the projector’

s lens becomes damaged or broken it should be replaced. If the lamp becomes 

damaged or deformed in any way it must be replaced. If the light from the lamp appears dim this 
would normally indicate that it is reaching the end of its life and it should be changed at once, old 
lamps run to the extremity  of their life can explode. If the projector does not function, check the fuse 
on the power socket of the projector, they should only be replaced by fuse of the same specified 
value 6.3A/250V (fast blow, 5mmx20mm). On the main PCB inside the projector there is also a fuse 
rated 4A/250V (fast blow, 5mmx20mm). Should these be damaged call a qualified technician before 
replacement. The projector has thermal protection device that will switch off the projector in case of 
overheating, should this operate, check that the fans are not blocked, and if they are dirty  clean them 
before switching on the projector again. Check that the fans are operational, if not call a qualified 
technician. 
 

Any maintenance work should only be carried out by a qualified technician. 

DMX CONTROL CHANNEL FUNCTIONS

 

MAINTENANCE 

Summary of Contents for PR-111ER MOON















Reviews: