Moon manual.doc
11/14
PROBLEM
RESOURCE
The projector does not start
Check the fuse on the socket is blown or not.
Check if the lamp is good or not.
The projector switches on but does not
answer to commands
Check the projector is correctly configurated.
Check the XLR cable is good.
The projector only functions
intermittently
Check the fan is working and not dirty.
The beam appears dim
Check the lamp is not at the end of its life.
Check the optics are clean.
Projection with halo
Carefully clean the lamp and optical group lenses.
Defecting projection
Check the lenses are not broken.
Remove dust or grease stored on lenses.
Power supply:
100V, 120V, 200V, 220V, 240V AC 50/60Hz
Power consumption: 280W at 220V
Lamp:
MSD 250W discharge lamp
Channels:
6 channels
Signal:
Standard DMX 512
Control mode:
Sound activation, Auto programmes, Controller
Running mode:
Stand-Alone mode, Master/Slave synchro mode, Controller mode
Colours:
9 dichroic c white and rainbow effect
Gobos:
7 interchangeable rotating gobos + clear
Strobe:
Adjustable from 1 ~ 7 F.P.S.
Beam angle:
13.6
°
Movement:
Pan movement 175
°
/ Tilt movement 80
°
Net weight:
10kg
Others:
Auto thermal cut-off / Manual adjustable focus
TECHNICAL DATA
TROUBLESHOOTING
