© Powrachute, LLC. All Rights Reserved
Original Issue Date 28.05.2007 Revision Date: 28.05.2007
POWRACHUTE
Pilot Operating Handbook
Model: PEGASUS 582
14. Wing Layout
Set up into wind based on runway orientation. If unable to do so within
safe parameters, choose another runway and or location.
Remove bag from plane, place bag behind plane label facing away from
rear of plane.
Remove chute from bag and lay out using inverted or stacked method
depending on wind and pilot preference.
After removing line socks, check for tangled line or line overs, Clean
lines so there are no tangles.
Going back to riser attachment points make sure there are no twist in
the risers, that you have a smooth flow of risers from where the links
connect to plane. Follow back and position on riser cleats located on
prop guard. Make sure steering line and risers are taut, not wrapped
over anything and flow smoothly from rapide links back to chute.
Steering line should be above the cleat not hanging below.
Once cleared repeat for other side. Stow line socks and chute bag.
Double check to make sure all lines are clear on both sides.
Before getting into plane and after securing passenger make sure
there is no slack in the steering lines and risers.
33