© Powrachute, LLC. All Rights Reserved
Original Issue Date 28.05.2007 Revision Date: 28.05.2007
POWRACHUTE
Pilot Operating Handbook
Model: PEGASUS 582
9.6 Pegasus Power Parachute Components - Parachute
The parachute that comes with your Pegasus PPC is manufactured by Elan, one of the
premier parachute manufacturers in all the world. Your Elan wing has been carefully
engineered with the finest materials and workmanship to last many flying seasons with
the proper care.
The Pegasus PPC comes standard with the Elan 500 chute, although the Elan 550
can be purchased as options.
PD 500 -
The PD 500 is a good all around chute, and an economical choice. A square
chute of 500 square feet, it inflates quickly, turns with little leg pressure, handles like a
sports car, and carries moderate loads well.
PD 550 -
At 550 square feet, the PD 550 will carry larger loads than the 500. It is
slightly more difficult to kite than the 500 (because of the added size) and turns a little
slower as well.
Chute Care -
Follow the guidelines included in the parachute manual for care
instructions and inspection procedures for your parachute. Dirty spots can be cleaned
with a damp rag (water only), and very small puncture-type holes can be repaired with
sail tape, available from an aviation supply catalog or a parachute service facility.
NEVER try to repair damaged lines yourself, especially by tying them!
This could
result in serious injury or death. Refer all line damage or parachute rips and tears to a
qualified parachute rigger or to the parachute manufacturer.
QuickLinks -
The parachute is attached to the riser straps by stainless steel quicklinks.
The quicklinks are rated for very high load capacities, but should be inspected for
damage and tightness prior to every flight.
DO NOT USE STANDARD HARDWARE
STORE QUICK LINKS FOR REPLACEMENTS!
27
