PowerWalker 10122192, User Manual

Page: 29 / 122

24
Make sure your IT settings can access the public network and Microsoft Azure Cloud
2. Enable the IoT function in LCD (see Settings -> IoT)
3. Search the “WinPower View” from Google Play store or Apple APP store,
downloading and installing.
4. Open the app, register an account, log in, follow the instructions of the app.
5. Tap on the upper right corner, scan the SN barcode on UPS label to add
device.
For more detail information and Q&A about the IoT and APP, please refer to the
HELP menu in the app.
- Wireless connection
The wireless module is optional, please contact your local distributor for details
5.4 Modbus TCP
Built-in ethernet port offers Modbus TCP feature to facilitate remote monitoring of the
UPS into your own software. Contact with your service for protocol details.
5.5 Intelligent Card (Optional)
Intelligent Card allow the UPS to communicate with different types of devices in
variety of networking environments. The PowerWalker VFI ICT/ICR IoT series could use
the following connectivity cards
,
please contact your local distributor for details
•
NMC Card
- Ideal monitoring solution enables user to monitor and control the
status of UPS on web browser via internet
• CMC card
-
provides connection to Modbus protocol with standard RS485 signal.
• AS400 G2 card - Provides voltage-free dry-contact signals for programmable
controller and management system
•
EMP
- Supports temperature and humidity sensors for remote environment