15
FIGURE 15
FIGURE 16
iv
Connect the power leads provided in the accessory
box to the battery. In the case of a 2 or 4kWh unit
the 4 wire connection piece will plug into the wall
of the Powervault while both of the 2 cable power
leads should plug into the battery See figure 15.
v
The 6kWh unit will require that the power leads be
split into the two battery packs on the lower shelf.
See figure 16.
Battery power cables
Data cable connection
5 Digit Serial Number
Required for
commissioning of unit and
connecting to the portal
Data Jump Connection
Part of Accessory Box
Data connection
Left side in
Right side out
Power connections to Powervault
Part of Accessory Box
Data connection to Powervault
Hard wired into Powervault Unit
