11
Solar input voltage (Volts) Solar input current (Amps)
Setting Buttons: SET, UP/DOWN, ON-OFF
Allows to enter in Programing or parameter setting mode
6. Programming Mode
(PARAMETER SETTINGS):
1. When the inverter is working normally, press the
SET
button for 5S to enter to the
setting menu (P0). LCD shows the working mode icon flashing. Press the
UP
button
or the
DOWN
button to scroll the menu options (P1 to F9). When on the right menu
option, press the setting button (
SET)
for 1S to display the setting parameters,(At this
time, the working mode icon is not flashing, and the parameter icon is flashing.) Press
the
UP
button or the
DOWN
button to select the parameter to set, press the SET
button for 1S to enter the new parameter and exit from the parameter selection.(At
this time, the working mode icon flashes, and the parameter icon does not flash. Go
back to P0 press the
SET
button twice to save the settings and exit the setting menu.
Parameter
setting
Menu options
P0
:Set work mode menu:
Press the SET button 3S to enter the setting menu,
the menu selection icon is flashing. Press UP or
DOWN to scroll setting pages P1 to F9 If need
save and exit, go back to P0 and press the SET
button twice.
Summary of Contents for ECO SW 10096
