Poweramp RCR Series, Owner & User Manual

Page: 26 / 60

24
4111-0044 — June 2021
© 2021 Systems, LLC
Ramp Loading/Unloading
1. Before activating dock leveler, ensure lip will avoid
contact with transport vehicle frame, sides and cargo
during dock leveler activation. If contact is likely or
observed, reposition transport vehicle.
2. Instruct driver to remain at the dock until the
loading or unloading process has been completed.
3. Lower the dock leveler onto the transport vehicle
as follows:
a. Press and hold the LOWER button ( A ) until
leveler reaches transport vehicle, then allow
leveler to descend into transport vehicle.
b. Make sure that the lip is fully extended and
supported on the transport vehicle along the
entire width of the platform, with at least 4 in.
(102 mm) of lip contacting the transport vehicle
bed. See Figure 23.
4. Proceed with loading or unloading the transport
vehicle.
5. When loading or unloading is finished, raise the
platform by Pressing and holding RAISE ( B ) button
until the leveler is fully raised.
6. Indicate to transport operator that transport
vehicle may leave the dock.
Operating Instructions
A—LOWER Button
B—RAISE Button
OPERATION
A
B
Figure 22
Figure 23