Poweramp RCR Series, Owner & User Manual

Page: 15 / 60

13
4111-0044 — June 2021
© 2021 Systems, LLC
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL:  1/32"
DECIMAL:
.00 =

.01"
.000 =  .005"
ANGULAR:  1 
MATERIAL
DRAWN BY CHECKED BY
DRAWING NO.
DATE
MarkS 10/5/2020
169947-ZD0
Fixed RCR
FINAL ASSEMBLY, RAIL RAMP
P O W E R A M P
M C G U I R E
D L M
S Y S T E M S
L o a d i n g D o c k E q u i p m e n t
This print is the property of Systems, LLC and represents a proprietary article in which Systems, LLC retains any and all
patent and other rights, including exclusive rights of use and/or manufacture and/or sale. Possession of this print does
not convey any permission to reproduce, print or manufacture the article or articles shown therein, such permission to be
granted only by written authorization signed by an officer or other authorized agent of Systems, LLC thereof.
STOCK NO.
AMERICOLD
REV A - ECN 18-066
Installation of Platform to Embed
1. Check the embed for proper construction
according to approved/certified pit drawings. Make
sure embed is level, plumb and square.
2. Remove any control panel, bumpers or palletizing
that may be banded to the dock leveler. Do not
remove banding on hoist cylinder.
3. Make sure the mounting hardware of lifting
brackets ( A ) is snug. The brackets should pivot
without binding on the mounting cap screw.
4. Attach lifting chains to lifting brackets ( A ) and to
a lifting device (i.e., hoist or fork truck) having the
appropriate lifting capacity and reach.
5. Lube the rear hinge pins using grease. Install the
hinge pins in one side of the rear embed hinge tubes,
leaving room for the platform hinge tubes.
6. Ensure maintenance props ( B ) are in the lowered
position and tightly secured.
7. Lower the RCR leveler down, centering the
leveler’s hinge tubes with the embed’s.
8. Insert the hinge pins, working from the outside to
the inside. Install and secure cotter pins in hinge pins.
9. Complete all hydraulic connections.
10. Proceed to “Install Control Panel and Wiring” on
Page 18.
Note: Do not connect hoist cylinder(s) at this time.
System must be purged of air before connecting.
Fixed RCR Installation
The dock leveler is heavy. Use a lifting device and
chains with the appropriate lifting capacity and
reach.
Always use the lifting brackets provided with the
unit whenever lowering or lifting a dock leveler.
B
B
Figure 7
INSTALLATION
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL:

1/32"
DECIMAL:
.00 =

.01"
.000 =  .005"
ANGULAR:  1 
MATERIAL
DRAWN BY CHECKED BY
DRAWING NO.
DATE
MarkS 10/5/2020
169947-ZD0
Fixed RCR
FINAL ASSEMBLY, RAIL RAMP
P O W E R A M P
M C G U I R E
D L M
S Y S T E M S
L o a d i n g D o c k E q u i p m e n t
This print is the property of Systems, LLC and represents a proprietary article in which Systems, LLC retains any and all
patent and other rights, including exclusive rights of use and/or manufacture and/or sale. Possession of this print does
not convey any permission to reproduce, print or manufacture the article or articles shown therein, such permission to be
granted only by written authorization signed by an officer or other authorized agent of Systems, LLC thereof.
STOCK NO.
AMERICOLD
REV A - ECN 18-066
A