Power Products TENERIFE, Instructions For Use Manual, Page: 52 / 106

E
sp
a
ñ
o
l
50
E
n
g
lis
h
P
o
rt
u
g
u
ê
s
E
sp
a
ñ
o
l
E
n
g
lis
h
P
o
rt
u
g
u
ê
s
4. Always put the remote control toward of the generator to make easier the
remote signal reception.
5. On the remote control, press the START button for a few seconds. The
engine will attempts to start for maximum 5 times, if all attempts failed the
light in the START/STOP button will flash in red. Wait at least 10 seconds
and try again. Otherwise, it may overheat and damage the starter motor.
Information: OPD Function (Output power delayed). Up to 20 seconds after the
starting, the generator does not generate electricity in the sockets. This ensures
that the generator starts without supplying power to the connected equipment.
Information: If the LED of the remote control device does not turn on or is weak,
replace the battery.
7.2 Remote control shutdown.
1. To stop the generator just press STOP on the remote control. If you do not
use the generator for some time, press the switch to OFF position on MAIN
SW (general main switch) and turn the DIAL to the OFF position.