WWW.POWERPROBETEK.COM
5
APPEARANCE AND CONTROLS
Removeable Probe Tip uses standard 4mm
banana type connector enabling use of
different probes, leads, or extensions.
LED, Green (-) Will light indicating a path to
ground. More than 10 Ω resistance and/or
more than 0.5 volts on a ground circuit, the
Green LED will not illuminate.
LED, Red (+) Will light indicating (Batt +)
Battery Positive. If the circuit voltage drop
is more than 0.5 volts from battery voltage,
the Red LED will not illuminate.
Color Screen - Large Hi-Res LCD display
shows multiple readings on the one screen.
A graphic interface indentifies what mode
you’re in.
Button, “Clear” used to clear Min/Max in
Multi-meter modes.
Button, “Pair” used to connect to the APP.
Button, “Up”, “Down”, “Left”, “Right” Used to
navigate the menus.
Button, Center; “MODE” Select - Used to
select a test mode when navigating menus.
Button, “Flip” Used to turn the screen con-
tent upside down.
Button, “Mute” Used to turn the Speaker-
Tone On/Off.
Rocker Switch (replaceable) Part
#PPTK0021 - When rocker switch is
pressed forward, battery power is applied
to the probe tip. When rocker switch is
press rearward, battery ground is applied
to the probe tip. Can only be used when in
either of the DC voltmeter modes.
Speaker - Distinct tones for power or
ground.
2
3
4
5
6
7
8
11
1
9
10
12
