The Pro Series app will need to be paired with your
Maestro
™.
With the tool powered on, open your Pro Series App.
You will see a selection to Pair Device. This will work with all
Power Probe Tek Tools that use the wireless communication.
Press the Pair button on the app, it will prompt you to begin
the pairing process. There is a button on the tool labeled
“Pair”. When prompted by the app, push the button and your
tool will pair with the app.
To use the tool within the app, simply select a mode on the
Maestro
™ and it will populate on the screen. Changing modes
on the tool will be tracked by the app and change with it.
When finished, be sure to save your data!
WWW.POWERPROBETEK.COM
27
PAIRING
