A.
Handle
B.
Spray Gun
C.
Adjustable nozzle
D.
On/Off Switch
E.
Spray Wand
F.
Wheel
G.
Water Outlet
H.
GFCI Power Plug
I.
Water Inlet
J.
High-Pressure Hose
ASSEMBLY & INSTALLATION
1.
Slide the handle into the two receivers on top of the main unit.
Secure each side with a screw from the rear.
2.
Slide the gun holder into the received on the right-hand side. Push
until the top is level with the handle frame to secure it.
3.
Align the accessory holder with the rear openings and secure with
two screws.
4.
Push each wheel axle into the bottom-side openings until they click
into place.
Fig. 1
Fig. 2
Fig. 3
ATTACH THE WAND AND GUN
1.
Screw the wand onto the spray gun. Make sure the
connection is tight.
V
4
.0
ELECTRIC PRESSURE WASHER
8976821
Page 9
Assistance available at www.princessauto.com or 1-800-665-8685
IDENTIFICATION KEY
