STARTING THE PRESSURE WASHER
WARNING! Press the red switch on the bottom of the spray
gun to prevent accidental activation. Aim the spray gun in a
safe direction and test the trigger to ensure the lock is
working.
NOTICE! DO NOT siphon standing water for the water
supply. Particulate matter can contaminate the pump. Use
only clean, cold water (less than 100°F / 37.7°C).
NOTICE! DO NOT run the pump without the water supply
connected and turned on. This may damage the pump
mechanism beyond repair.
When the motor is running, do not allow the pressure washer to remain
idle for more than two minutes. If allowed to remain idle, the water in
the unit will heat up, possibly causing damage to the pressure washer.
1.
Turn on the water spigot.
2.
Squeeze the trigger for one minute to purge air
from the system. Reset the trigger guard.
3.
Turn the pressure washer on by twisting the dial
to the ON position.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace
damaged or worn components.. Only use identical replacement
parts when servicing.
3.
Only use accessories intended for use with this tool. Follow
instructions for changing accessories.
4.
Keep the tool handles or gripping surfaces clean and dry.
5.
Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
Fig. 7
V
4
.0
ELECTRIC PRESSURE WASHER
8976821
Page 11
Assistance available at www.princessauto.com or 1-800-665-8685
