Problem(s)
Possible Cause(s)
Suggested Solution(s)
Water leaking
at pump.
1.
Loose connections.
2.
Piston packing is
worn.
3.
Worn or broken O-
rings.
4.
Pump head or
tubes damaged
from freezing.
1.
Tighten connections.
2.
Have parts cleaned or replaced
by authorized dealer.
3.
Have parts cleaned or replaced
by authorized dealer.
4.
Have parts cleaned or replaced
by authorized dealer.
Pump
pulsates.
Nozzle obstructed.
See Check Spray Wand and
Adjustable Nozzle section.
Motor will not
start.
1.
Plug not properly
inserted in outlet.
2.
Faulty outlet.
3.
Thermal switch has
tripped.
1.
Push plug into outlet until
seated.
2.
Use different outlet and have
electrician replace the faulty
outlet.
3.
Turn off the unit and wait
several minutes to allow the
motor to cool.
Motor
suddenly
stops.
Thermal safety switch
has tripped.
Turn off the unit and wait several
minutes to allow the motor to cool.
Confirm the power supply matches
the pressure washer's requirements
(see Specifications) before
restarting the motor.
V
4
.0
ELECTRIC PRESSURE WASHER
8976821
Page 15
Assistance available at www.princessauto.com or 1-800-665-8685
