a.
Place the power cord in a position that prevents it from coming
into contact with the tool or getting caught by the workpiece.
The cord should always stay behind the tool.
b.
Do not pull on the cord to disconnect the plug from an outlet.
c.
Keep the cord away from heat, oil, sharp edges or moving
parts.
d.
Never carry the tool by the power cord
6.
Position the cord so it is not be stepped on, tripped over or
otherwise subjected to damage or stress.
7.
Do not wrap the cord around the tool, as sharp edges may cut
insulation or cause cracks if wound too tight. Gently coil cord and
either hang on a hook or fasten with a device to keep cord together
during storage.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage.
Contents:
Pressure Washer
Accessories Holder
Gun Holder
Handle
Water Inlet Connector
Adjustable nozzle
Spray Wand
Spray Gun
High-Pressure Hose
8976821
ELECTRIC PRESSURE WASHER
V
4
.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 8
