2.
Attach the adjustable nozzle to the spray wand.
Push and twist to connect.
3.
Insert the spray hose’s inlet coupler into the spray
gun handle and turn clockwise until it is hand tight.
4.
Attach the spray hose’s other end onto the pump’s
high pressure outlet and secure until hand-tight.
5.
Screw the garden hose onto the water inlet pipe.
6.
Attach the other end to the water spigot.
OPERATIONS
Choose the nozzle aperature that best meets the needs of the job. Only
use the adjustable nozzle on surfaces capable of withstanding the force
of the spray.
ADJUSTABLE PRESSURE NOZZLE
Rotate the adjustable nozzle to change the spray pattern based on the
cleaning purpose and material strength.
Arc
Purpose
0°
Narrow stream to clean and remove embedded grit or grime from concrete
or brick surfaces.
15°
Heavy duty cleaning of concrete surfaces or without use of chemicals.
25°
Clean wood surfaces compacted dirt, paint, oil or mildew. Also for use with
chemicals.
40°
Clean delicate surfaces like stucco or siding. Also patio furniture or home
siding.
ATTACH THE WATER HOSE
1.
Attach the hose to a water spigot. The water hose muse be 10 ft or
longer with no other connections that will restrict or divert the water
flow.
2.
Check the screen in the pump’s water inlet valve and remove any
debris
3.
Run water through hose to flush out debris, before attaching the
end to the water inlet.
Fig. 4
Fig. 5
Fig. 6
8976821
ELECTRIC PRESSURE WASHER
V
4
.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 10
