Power Electronics SD700 Series, Applications Manual, Page: 44 / 63

SD700
POWER ELECTRONICS
42
FAULT MESSAGES. DESCRIPTIONS AND ACTIONS
Parameter Screen Description Address Range Modbus Range
G25.1.1 1 CONTROL MODE=1 Control mode 42035 0 to 1 0 to 1
G25.1.2
2 MAN SPD REF= LOCAL
Source selection for speed reference in
manual mode
42041
LOCAL
AI1
AI2 0 to 2
G25.1.3 3 MAN SPEED=+0.0%
Value of speed reference for LOCAL source
in manual mode
42042 -250% to +250% -20480 to +20480
G25.1.4
4 ALT MAN S R=LOCAL
Source for the Alternative speed reference in
manual mode
42043
LOCAL
AI1
AI2 0 to 2
G25.1.5 5 SETPT1=0.0Bar Local setpoint 1 for PID 42151
0 to 3276
Engineering Units
0 to 32760
G25.1.6 6 SETPT2=0.0Bar Local setpoint 2 for PID 42152
0 to 3276
Engineering Units
0 to 32760
G25.1.7 7 SETPT3=0.0Bar Local setpoint 3 for PID 42153
0 to 3276
Engineering Units
0 to 32760
G25.1.8 8 SETPT4=0.0Bar Local setpoint 4 for PID 42154
0 to 3276
Engineering Units
0 to 32760
G25.1.9 9 SETPT5=0.0Bar Local setpoint 5 for PID 42155
0 to 3276
Engineering Units
0 to 32760
G25.1.10 10 SETPT6=0.0Bar Local setpoint 6 for PID 42156
0 to 3276
Engineering Units
0 to 32760
G25.1.11 11 SETPT7=0.0Bar Local setpoint 7 for PID 42157
0 to 3276
Engineering Units
0 to 32760
G25.1.12 12 SETPT8=0.0Bar Local setpoint 8 for PID 42158
0 to 3276
Engineering Units
0 to 32760
G25.1.13 13 T AutOFF=OFF Time for automatic stop 42044 OFF; 0.1 to 99.9h 0 to 9999
G25.2.1 1 PID SETP=LOCAL PID setpoint source 42045
LOCAL
AI1
AI2
0 to 2
G25.2.2 2 PID aSTP=LOCAL Alternative PID setpoint source 42374
LOCAL
AI1
AI2
0 to 2
G25.2.3 3 PID FBK=AI2 PID feedback source 42046
AI1
AI2
PULSE
0 to 2
G25.2.4 4 PID Kc=1.0 Proportional gain of PID regulator 42047 0.1 to 20 1 to 200
G25.2.5 5 PID It=5.0s Integral time of PID regulator 42048 0.1 to 999.9s, Max. 1 to 9999; 10000
G25.2.6 6 PID Dt=0.0s Derivation time of PID regulator 42049 0.0 to 250s 0 to 2500
G25.2.7 7 PID ERR=+xx.x% Error of PID regulator 42050 +0 to +100% --32768 to 32768
G25.2.8 8 ERR=+xx.xxkPa Error of PID regulator in engineering units 42051
+0.0 to +3276
Engineering Units
---32768 to 32768
G25.2.9 9 PID INVERT=N PID output inversion 42326
N
Y
0 to 1
G25.3.1 1 LP Pon=0.0% Wake up level of the drive 42064 0.0 to 3276Bar 0 to 32760
G25.3.2 2 FP SpON=+90.0% Start speed for the fixed pumps 42055 -250% to +250% -20480 to +20480
G25.3.3 3 FP ErON=+10.0% Minimum PID error to start the fixed pumps 42056 OFF=0 to +200% 0 to 16384
G25.3.4 4 FP T1 ON=10s Delay time to start fixed pump 1 (Relay 1) 42062 OFF=0 to 6000s 0 to 60000
G25.3.5 5 FP T2 ON=10s Delay time to start fixed pump 2 (Relay 2) 42065 OFF=0 to 6000s 0 to 60000
G25.3.6 6 FP T3 ON=10s Delay time to start fixed pump 3 (Relay 3) 42066 OFF=0 to 6000s 0 to 60000
G25.3.7 7 FP T4 ON=10s Delay time to start fixed pump 4 (AO1) 42067 OFF=0 to 6000s 0 to 60000
G25.3.8 8 FP T5 ON=10s Delay time to start fixed pump 5 (AO2) 42068 OFF=0 to 6000s 0 to 60000
G25.4.1 1 LP T SLP=20s Delay Time before activating sleep mode 42306 OFF=0; 1 to 999s 0 to 9990
G25.4.2 2 40.0% Sleep speed for local setpoint 1 42307 +0.0 to +250% 0 to 20480
G25.4.3 3 40.0% Sleep speed for local setpoint 2 42308 +0.0 to +250% 0 to 20480
G25.4.4 4 40.0% Sleep speed for local setpoint 3 42309 +0.0 to +250% 0 to 20480
G25.4.5 5 40.0% Sleep speed for local setpoint 4 42310 +0.0 to +250% 0 to 20480
G25.4.6 6 40.0% Sleep speed for local setpoint 5 42311 +0.0 to +250% 0 to 20480