Power Electronics NB WALL ADVANCED, Hardware And Installation Manual

Page: 34 / 54

NB Wall POWER ELECTRONICS
32
CABLE ACCESS AND CONNECTIONS
Cable entry plate
The different holes are prepared for cable access, both for power supply and communications cables.
The arrangement of the cables is showed below for each frame.
Frame 1:
The AC input connection enters the equipment through one of the holes on the right, highlighted in the
image with a rectangle; while the Ethernet cable enters is through one of the holes on the left, intended
for communications, highlighted in the image with an oval.
Frame 2:
The AC input connection enters the equipment through one of the holes highlighted in the image with
a circle (1); while the Ethernet cable enters through one of the holes for communications, highlighted
in the image with a rectangle (2). The central holes of the bottom wiring plate (3) are for the hose outlets
if the model includes them.
Bottom entry
1
1
1 1
2
2
3
Rear entry