NB Wall
POWER ELECTRONICS
10
SAFETY INSTRUCTIONS
PERSONAL PROTECTIVE EQUIPMENT (PPE from now on) REQUIRED
The use of PPE in accordance with standards is required to repair and maintain the equipment. Follow
applicable instructions at the installation site to comply with national and local regulations.
In the case of tasks with voltage present
, it is mandatory to use an Electric Arc Safety Kit, anti-static
and flame-retardant clothing, insulating gloves and helmet with a screen.
A detailed example of the PPE used is shown below. The customer must specify in his safety
instructions (hazard statement and work procedure) which PPE is required and when and how they
should be used according to his electric arc studies, the characteristics of the site, the chargers, the
installation and the country.
Power Electronics assumes no liability for damage resulting from improper use of the equipment
or failure to comply with local or national regulations.
Always follow local regulations / Health & Safety standards.
PPE FOR INSTALLATION
Mechanical gloves
Safety boots
Safety helmet
Safety glasses
Additional PPE for commissioning and maintenance tasks
PPE
STANDARD REGULATION
Safety footwear:
EN ISO 20345
Helmet with screen:
UNE-EN 397, UNE-EN 166
Safety clothes for electrical works:
EN 470-1, EN 61482-1-2, EN 1149-5, EN 11612
Electric gloves:
EN 60903:2003
Summary of Contents for NB WALL ADVANCED
