Angle grinder operation
Never use abrasive cutting discs for deburring work!
Cutting
Maintain firm contact with the workpiece to prevent vibration and do not tilt
or apply pressure when cutting. Use moderate pressure when working,
appropriate to the material that is being worked on. Do not slow down
grinding discs by applying sideways counter pressure. The direction in which
you want to cut is important.
The machine must always work against the direction of the cut; so never
move the machine in the other direction! There is the risk that the machine
will catch in the cut causing kickback and that you will lose control.
Switching the machine on
Fig. B
• Slide the On/off switch (5) down to the On position.
• Press the trigger (1) to start the machine.
Switching the machine off
Fig. B
• Release the trigger (1) to stop the machine.
• Slide the On/off switch (5) to switch the machine off.
UK Helpline 0203-5142281 • Ireland Helpline 1800-719901
Web Support: www.servotool.eu
Model Number: PAC-18/4K
24
CDM6180 Ma-GB-IRE 1108-10.indd 24
8/10/11 10:32:35 AM