Angle grinder operation
discs which are cracked, ripped or otherwise damaged.
• Before use, let the machine run idle for 30 seconds. Immediately switch
off the machine in case of abnormal vibrations or occurrence of another
defect. Carefully inspect the machine and grinding disc before switching
the machine on again.
• Make sure that sparks do not put people into danger or that they contact
highly flammable substances.
• Make sure that the workpiece is sufficiently supported or clamped. Keep
your hands away from the surface to be cut.
• Always wear safety goggles and hearing protection. If desired or required
also use another kind of protection such as an apron or helmet.
• Ensure that mounted wheels and points are fitted in accordance with the
manufacturer’s instructions.
• Ensure that blotters are used when they are provided with the bonded
abrasive product and when they are required.
• Never use the tool without a guard.
• For tools intended to be fitted with threaded hole wheel, ensure that the
thread in the wheel is long enough to accept the spindle length.
• Ensure that ventilation openings are kept clear when working in dusty
conditions. If it should become nessesary to clear dust, first remove the
battery from the tool (use non metallic objects) and avoid damaging
internal parts.
UK Helpline 0203-5142281 • Ireland Helpline 1800-719901
Web Support: www.servotool.eu
Model Number: PAC-18/4K
22
1
2
5
4
3
CDM6180 Ma-GB-IRE 1108-10.indd 22
8/10/11 10:32:34 AM