Safety instructions
UK Helpline 0203-5142281 • Ireland Helpline 1800-719901
Web Support: www.servotool.eu
Model Number: PAC-18/4K
14
To avoid this:
• Firstly do not connect any wires to the terminals of the battery pack;
• Ensure that no metal objects (nails, coins, paper-clips) are caught in the
opening of the battery pack;
• Do not expose the battery pack to water or rain.
14. If the battery pack is broken or can no longer be re-charged it must be
properly disposed of.
15. Never throw the battery pack into water or a fire – it may explode.
Electrical safety
Warning! When using electric tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product and save these
instructions.
Always check that the voltage on the batterypack corresponds to the
voltage on the rating plate. Also check that your mains voltage
corresponds to the input voltage of the battery charger.
The machine is double insulated in accordance with EN60335;
therefore no earth wire is required.
Charging batteries
• Position the battery in the battery charger as indicated in the illustration.
• Plug in the battery charger. The green light is then illuminated, red light
flashing.
• As soon as both green light and red light are illuminated, charging has
finished and the accumulator is ready for use.
Only use the battery charger in a dry environment at a temperature
between 5 °C and 40 °C.
The battery on the machine you have purchased is not charged up. Before
using it for the first time leave it to charge for 1 - 2 hours in order for it to
reach its full capacity. The total capacity of the battery will be reached after it
has been charged 4 – 5 times.
CDM6180 Ma-GB-IRE 1108-10.indd 14
8/10/11 10:32:33 AM
