Safety instructions
UK Helpline 0203-5142281 • Ireland Helpline 1800-719901
Web Support: www.servotool.eu
Model Number: PAC-18/4K
13
Important safety advice concerning the battery pack & battery charger
If you should come into contact with any acid from the Battery pack, wash
the affected parts with water immediately. If acid should come into contact
with the eyes, rinse them immediately with water and seek medical advice as
soon as possible.
1. Before using both the battery pack and the battery charger, make sure
you have read and understood the operating instructions and safety
information.
2. Only use the battery pack with the battery charger provided – using other
chargers could be dangerous.
3. Keep the battery pack, tool and battery charger away from damp and wet
conditions.
4. Before using the battery charger, check all wires are properly connected.
5. If any wires on the charger are damaged, do not use it until these have
been replaced.
6. When the charger is not in use it should not be plugged in. When
unplugging, do not pull the plug out by the cable.
7. If the charger breaks down or suffers from other technical problems, take
it to a recognised dealership to be checked before using it again. Any
damaged parts must be replaced.
8. Take care when handling the battery pack, do not drop it or knock it
against other things.
9. Never attempt to repair the battery charger or battery pack yourself; this
can be extremely dangerous. Repairs should always be carried out by a
recognised dealership.
10. Always unplug the charger before cleaning or carrying out any other
maintenance on it.
11. Do not attempt to charge the battery pack in temperatures of below 10
degrees or above 40 degrees centigrade.
12. The air vents on the battery charger must be kept unblocked.
13. The battery pack must not be short-circuited.
When an apparatus short-circuits, the strength of the electric current
is increased. This can cause the apparatus to over heat, catch fire or
even explode, causing damage and also endangering the operator.
CDM6180 Ma-GB-IRE 1108-10.indd 13
8/10/11 10:32:33 AM