![background image](http://html.mh-extra.com/html/power-craft/1020w/1020w_user-manual-and-warranty_1586286016.webp)
UK Helpline 0905-460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PAG-125/1020
16
Operation
Never use abrasive cutting discs for deburring work!
Cutting
Fig. G
Maintain firm contact with the workpiece to prevent vibration and do not tilt
or apply pressure and when cutting. Use moderate pressure when working,
appropriate to the material that is being worked on. Do not slow down
grinding discs by applying sideways counter pressure. The direction in which
you want to cut is important. The machine must always work against the
direction of the cut; so never move the machine in the other direction! There
is the risk that the machine will catch in the cut causing kickback and that
you will lose control.
The ON/OFF/ switch
Fig. A
Turn the machine on using the ON/OFF (Fig A, 1, page 4). The machine will
turn off if you release the switch.
Locking the switch
The ON/OFF/ switch (Fig A, 1, page 4) can be locked by pressing in the
ON/OFF/ switch and then locking it with the locking button (Fig A, 6, page 4).