![background image](http://html.mh-extra.com/html/power-craft/1020w/1020w_user-manual-and-warranty_1586286013.webp)
UK Helpline 0905-460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PAG-125/1020
13
Assembly
•
Place the fixing-ring (8) on the guard: the ring-holes have to be on the
screw-holes.
•
Mount the guard and fixing-ring with help of the 4 screws and washers
(7).
•
To dismantle the protective cover, proceed in reverse order.
Be aware the screws are tightened well enough. Check regularly if
the screws are still fixed.
Mounting a grinding disc
Fig. C
Use grinding discs of the correct dimension. Use fibre reinforced grinding
discs only. The grinding disc must not touch the edge of the guard.
•
Press the spindle lock (Fig. A, 4, page 4) and turn the spindle (6) until it
engages in the lock. Keep the spindle lock pressed during this procedure.
•
Remove the flange nut (10) from the spindle using the spanner (11).
•
Position the grinding disc (4) on the flange (9).
Lay the bottommost flange with the notch down underneath.
• Place the flange nut on the spindle and tighten it using the spanner.