![background image](http://html.mh-extra.com/html/power-craft/1020w/1020w_user-manual-and-warranty_1586286014.webp)
UK Helpline 0905-460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PAG-125/1020
14
Assembly
When doing so, ensure that the flange nut is fitted in the correct direction,
determined by the thickness of grinding disc (description in the next section).
Ensure that the top flange has been fully turned onto the spindle
and that the grinding disc is firmly clamped between the two
flanges so that the disc cannot move.
•
Release the spindle lock and check that the spindle is unlocked by rotating
it.
Mounting cutting, grinding discs and roughing discs
Fig.D
Fig. E
Fig. D and E show how to mount the flange (11) when using thick (4 – 8 mm)
and thin (2,5 – 4 mm) discs.
The following grinding discs can be used with this grinder.
• For deburring: grooved, fibreglass reinforced type 27. Dimensions Ø 125 x
6.0 x 22.2 mm.
• For slitting/ cutting: grooved, fibreglass reinforced, type 41 and type 42.
Dimensions Ø 125 x 3.0 x 22.2 mm.
If you use normal grinding discs they should always be fibreglass
reinforced.