![background image](http://html.mh-extra.com/html/power-craft/1020w/1020w_user-manual-and-warranty_1586286012.webp)
UK Helpline 0905-460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PAG-125/1020
12
Assembly
Assembling the hand grip
Fig. A
The hand grip is suitable for either left or right-handed use.
•
Turn the hand grip (Fig A, 5, page 4) to the notch on the right side of the
machine for left-handed use.
•
Turn the hand grip (Fig A, 5, page 4) to the notch on the left side of the
machine for right-handed use.
•
Turn the hand grip to the notch on the top of the machine to use it
vertically.
Assembling and removing the protective cover
Fig. B
Only change the protective cover for a metal version or one made from
similar material. The position of the protective cover can be adjusted
according to the working conditions without using tools. The closed side of
the protective cover must always face toward the user.
Assembly
•
If a flange nut (Fig C, 10, page 13) and the lower flange disc (Fig C, 9,
page 13) are fitted, remove them from the spindle (see section on Using a
Grinding Disc).
•
Remove the 4 screws with circlip (9) and the retaining ring (8).
•
Fit the protective cover (2) over the spindle (10) and onto the device.
Ensure that the circlip (9) is located under the protective cover (2).
7
8
9
2
10