Powered by Safety
®
21
Recommended Renewal Parts and Replacement Procedures
IB-50022A
Ch 7 Recommended Renewal Parts and
Replacement Procedures
A. O
RDERING
I
NSTRUCTIONS
1. To order Renewal Parts from Powell, visit
the website at www.powellind.com or call
1.800.480.7273.
2. Always specify the complete nameplate
information including:
•
Name of end user
•
Location of installation
•
Type of device including rated voltage
and rated amperes
•
Serial number of the device
•
Description of part
3. Specify the quantity and description
of the part and the instruction bulletin
number. If the part is in any of the
recommended renewal parts tables, specify
the catalog number. If the part is not in
any of the tables, a description should be
accompanied by a marked illustration from
this instruction bulletin or photo.
B. R
ECOMMENDED
R
ENEWAL
P
ARTS
A sufficient amount of stocked parts minimizes
service interruptions caused by breakdowns
and saves time and expense. When continuous
operation is a primary consideration a larger
quantity of renewal parts should be stocked
depending on the severity of the service and
the time required to secure replacement parts.
Since parts may be improved periodically,
renewal parts may not be identical to the
original parts. The recommended quantity is
not specified. This must be determined by the
user based on the application.
Powell recommends that only qualified persons
perform maintenance on these units. Refer
to the Qualified Person Section in the front of
this instruction bulletin. If these ground and
test devices are installed in a location where
they are not maintained by a qualified person,
a spare ground and test device should be on
site ready replacement. The malfunctioning
unit can then be returned to the factory for
reconditioning.