![background image](http://html1.mh-extra.com/html/pottinger/eurohit-58-n/eurohit-58-n_operating-instructions-manual_1583515008.webp)
Driving on public roads:
Safety Precaution!
Changing from working
position to transport position
is only to be carried out on
even, firm ground.
Only transport the machine
in the transport position!
Conversion from
working to
transport position
For safety reasons, turn off drive shaft and wait for rotor
to stop completely.
- Make sure that swivel area
is free and that nobody is
standing in the danger
area.
- Stopcock opened (position E)
Attention!
The order of operation must be
adhered to.
1. Pull rope (S). The stop function is raised.
2. The outer rotors are raised into the transport position by
actualing the control valve (ST).
3. Release rope (S) during
swivelling procedure so that
locking hooks can engage.
A
E
TD31/90/21
- Close stopcock (position A).
Attention !
- Check whether the locking hooks (10) are locked
into position correctly.
Locking the headstock during use on
roads :
For transport the headstock (SB) must be locked using a lock
nut.
B = transport position
Important!
Only reposition the
lock pin when the
machine is in the
raised position.
A
E
TD31/90/21
10
TD31/93/33
ST
GB
TRANSPORTPOSITION
TRANSPORTSTELLUNG 9600-GB (212)
- 8 -