POSIFLEX PST-6000 SERIES, Technical Manual

Page: 49 / 82

PST-6000 series Technical Manual 5 - 19
TM
operation during the programming, the programmable keyboard will give three beeps
to signify the failure of “Hot key programming” and the key content is not changed. If
the user pressed the “Esc” key to abort “Hot key programming”, the programmable
keyboard will also give three beeps immediately as a response to signify the abort.
COMMON PROGRAMMING (KBM.EXE)
COMMAND LISTING
IN VIEW MODE
ESC -- quit the keyboard programming program
F1 -- get help on command list
F3 -- enter the configuration screen
F5 -- enter ASCII-code editing mode
F8 -- enter scan-code editing mode
F10 -- quit the keyboard programming program
Ins -- toggle insert/overwrite status for editing (default = insert)
Del -- delete the content of the key where cursor stays
Home -- go to column A of same page same row
End -- go to column I of same page same row
PgUp -- go to one page less in cyclic manner
PgDn -- go to one page next in cyclic manner
Up arrow -- move cursor to one row up in cyclic manner
Down arrow -- move cursor to one row down in cyclic manner
Left arrow -- move cursor to one column left in cyclic manner
Right arrow -- move cursor to one column right in cyclic manner
ENTER -- enter ASCII-code editing mode, but if the last edit of the key was in scan-
code mode then this means enter scan-code editing mode.
Alt-A -- enter ASCII-code editing mode
Alt-C -- copy the key content of a key or contents of the keys in a page to buffer
Alt-E – erase the current page or all pages
Alt-G -- enter the configuration page
Alt-L -- load key definitions from a disk file
Alt-M -- enter multi-level shift marker
Alt-N -- enter scan-code editing mode