POSIFLEX PST-6000 SERIES Page 55 Technical Manual Download

Page: 55 / 82

PST-6000 series Technical Manual 5 - 25

In other words, the two approaches to utilize the software switch off function

are:

The recommended:

Keyboard gives closing command of Application Program

Application Program closes itself and gives switch off command

System turns the power off

The Alternative:

Keyboard gives closing command of Application Program and …

Application Program closes itself

Keyboard gives switch off command at a predefined time

System turns the power off

UPS BATTERY

The optional UPS battery is a maintenance-free lead-acid battery and is

targeted to support basically the data preservation and smooth running of the system

during intermittent power failure. This battery is not designed for prolonged power

support to the system against power shutdown. That means, when the AC power

outage is known to last for more than few minutes, it is advisable to turn off the

system instead of using the battery up while repeatedly using it up reduces the battery

life dramatically.

The battery will undergo self-discharging over time even when not in use. An

useful advice to preserve the battery at best condition is to regularly recharge the

battery if the battery or the PST system with the battery is put in storage for a period

of time. It is recommended to turn on the system to recharge the battery for 1 ~ 2

hours every 3 months of storage if the storage temperature is lower than 30

C. The

battery should be recharged for 1 ~ 2 hours every month if the storage temperature

exceeds 30

C. However, the user shall avoid the situation with storage temperature

over 30

C to protect the life of the battery. Do not connect any other battery to this

UPS battery because mixed use of batteries of different capacity, history, or

manufacturers may cause damages. In case the user wants to have a longer battery

support time during AC power off, he/she should consult his/her dealer for application

of an external 12 V battery.

Summary of Contents for PST-6000 SERIES



















































































Search results

Summary of Contents for PST-6000 SERIES

Reviews:

Related manuals for PST-6000 SERIES

Brands by name

Popular brands

POSIFLEX PST-6000 SERIES, Technical Manual

Search results

Summary of Contents for PST-6000 SERIES

Reviews:

Related manuals for PST-6000 SERIES

Brands by name

Popular brands