1
2
1
1
Ventilation screw
2
Oil sight glass
▪ Retract the splitting blade before changing the oil.
▪ Remove the ventilation screw.
▪ Tip the machine backwards.
▪ Drain the old hydraulic oil into a container.
▪ Screw the oil drain screw back into the tank and fill with new hydraulic oil through the
ventilation screw opening.
▪ Screw the ventilation screw into the tank.
▪ Turn on the machine and allow it to run for a short while.
▪ Check the oil level and top up hydraulic oil if necessary.
Total filling capacity of the hydraulic system:
Quantity
5 litres
Please note that the information here concerns initial oil filling. Depending on the type
and variant, the refill quantity may be slightly less (as some of the hydraulic components
are not empty).
Our hydraulic system is filled with OMV HLP M10 hydraulic oil.
This high-quality oil comes highly recommended when changing the oil.
A mixture of products of the same quality poses no problem.
Recommended hydraulic oils
Manufacturer
Oil specification
OMV
HYD HLP M10
SHELL
Tellus T 15
TOTAL
AZOLLA ZS 10
ESSO
Nuto H10
CASTROL
Hyspin AWH 10
ARAL
Vitam DE10
GENOL
HLP 10
FUCHS
Renolin B3
*.....biological hydraulic oils
Maintenance
27
