Posch SpaltAxt 8, Operating Instructions Manual

Page: 11 / 40

General
Scope
This user manual applies to the following machines:
Machine type
Article no. * Designation - Type Drive
M6140N SpaltAxt 8 - E5.5-400 Turbo Electric motor
M6141N SpaltAxt 8 - E3-230 Electric motor
M6142N SpaltAxt 8 - E3-400 Electric motor
M6162N SpaltAxt 8 - PS Turbo Tractor hydraulics
M6166N SpaltAxt 8 - PZG Turbo PTO shaft
M6167N SpaltAxt 8 - PZG-E5.5 PTO shaft/electric motor
M6168N SpaltAxt 8 - B4.1 Petrol engine
*The article number is stamped on the machine's rating plate.
Models
Accessories
F0002544 Special blade with rollers
F0002581 Wheelset
F0004278 Three-point linkage connection (for electric drive)
F0002179 Hour counter for machines with electric motor
F0001806 Hour counter for machines with Z motor
F0001482 Hour counter for machines with petrol engine
Description
The SpaltAxt 8 machine is suitable solely for splitting logs with a maximum length of 10–
55 cm.
The splitter is driven hydraulically; the hydraulic system is driven by the tractor's hydraulic
system or by an electric motor or by a PTO shaft or by a petrol engine.
The machine is operated via a two-hand safety controller.
As soon as the control levers of the safety circuit have been pressed down simultaneously,
the splitting knife is advanced.
As soon as you release one of the two control levers, the splitting knife halts. If the control
levers are pushed upwards, the splitting knife returns to its starting position.
The wood is placed on a pressure plate under the splitting knife.
The splitting knife presses into the log when working and splits it.
3
3.1
3.2
General
11