Put out of operation
Before switching off the machine, depressurise all hydraulic functions.
Position all controls in neutral or switch these off.
Put drives out of operation
Driven by electric motor (Type E)
Type E3
▪ Move the switch to the 0 position.
Type E5.5
▪ Move the switch to the 0 position.
Drive with 230V:
▪ Press the red pushbutton.
1
2
1
Green press button (ON)
2
Red press button (OFF)
Disconnect the machine from the mains.
▪ In addition, pull out the plug of the device.
Driven by tractor via universal joint shaft (type PZG)
▪ Disengage the universal joint shaft on the tractor.
– Before disengaging, turn the manual throttle to minimum.
▪ Shut down the tractor.
▪ Remove the universal joint shaft from the tractor.
Driven by the tractor's hydraulic system (type PS)
▪ Turn the control valve on the tractor to the “Off” position.
▪ Shut down the tractor.
Driven by petrol engine (type B)
▪ Set the petrol engine to idle speed and let it run for a few minutes to allow the engine
to cool down, then switch it off (see engine operating instructions).
6
6.1
Put out of operation
21
