En
vir
onm
entally Friendly Technolo
gy
Page 6
Operating the Circular Saw
▼
Mount universal shaft and attach
safety chain.
▼
Check all bolts on guards and tighten
if necessary.
▼
Check secure seat of circular saw
blade and tighten hexagonal nut if nec-
essary (see Fig. 9 - Saw blade change).
The saw blade must turn without mak-
ing contact.
▼
Push down gripper and table into
rear position. The table should automat-
ically return to its base position.
▼
Switch on pto on tractor and engage
slowly.
•
Observe the pto and saw blade
rotation direction
Fig. 3 - Rotation direction of tractor pto.
▼
The maximum pto rotation is
•
700 U/min
.
Cutting
Fig. 4 - Cutting process
▼
Position log on table and push with
gripper against guard
▼
Slide table towards saw blade and cut
log. The gripper protects against flying
wood chips.
▼
When cutting the log, do not push so
tight as to reduce the revolutions of the
saw blade. This causes a right-angle gear
overload
Machine with emergency stop
Caution!
Press the
emergency stop pedal
immediately in case of danger.
1.
Press through the
emergency stop pedal
with your food.
• The breke-shoe stops the saw blade
in a short time.
Log gripper
Summary of Contents for rz-600
Page 20: ... LEIBNITZ Your Posch Dealer ...