Posch rz-600, Operating Instructions Manual

Page: 7 / 20

En
vir
onm
entally Friendly Technolo
gy
Page 5
Operating the Circular Saw
Operating the Circu-
lar Saw
General Safety
Regulations
▼
Position Circular Saw on level
ground only.
▼ Wear protective footwear.
▼ Wear ear protection and goggles.
▼ Do not wear loose clothing.
▼ Never use faulty mains leads.
▼ Ensure that working place is suffi-
ciently lit as insufficient lighting consid-
erably increases the likelihood of injury!
▼
Work carefully! Incorrect handling
can lead to grave injuries from the rotat-
ing saw blade.
▼
Never work without guards.
▼
Do not use damaged, torn or
deformed saw blades.
▼
Always switch off drive when modi-
fying the circular saw.
▼ Use pushing stick for longitudinal
cutting.
▼ Do not operate the Circular Saw in
enclosed spaces.
▼ Press the
emergency stop pedal
immedi-
ately in case of danger.
▼
Specified saw blade diameters:
▼ Transport saw only with fixed table.
▼ Only use original POSCH spare
parts.
▼
Never run machine unattended.
▼
Minimum operator age: 18
Noise Information
When cutting logs or timber, a noise
level of 98 - 100 dB(A) can be expected
near the operator's ears.
We therefore urgently recommend the
use of ear protection.
Start-up
▼ Position saw on level ground.
▼ Attach pto circular saw to three-point
linkage of tractor.
• During operation the saw must be
fixed to both bottom steering links of
tractor.
Saw Blade Diameters
for longitudinal cutting 50 cm
for log cutting 60 cm
Table 2: Approved saw blade sizes